Half Gallon Kit Table Top Epoxy
Pour Your Own Epoxy® Table Top epoxy is used to achieve a wet gloss epoxy flood coat finish for bar and table top epoxy coating. This wood or concrete countertop epoxy is a self-leveling high gloss finish epoxy that can also be tinted with mica powders, dyes and alcohol pigments for stunning faux marble finishes or craft epoxy silicon mold projects.
Pour Your Own Epoxy® Table Top epoxy features a 1:1 mixing ratio and self-levels at 1/8 inch thick; we recommend using a misting bottle with Denatured Alcohol to remove surface bubbles. Deeper pours can be achieved with use of pressure pot for small casting projects.
When using indoors; ventilation or respiration equipment is recommended.
DO NOT EAT OR DRINK EPOXY – AVOID SKIN CONTACT – WEAR SAFTEY GOGGLES
Each epoxy kit includes 1 resin (part A white caps) and 1 hardener (part B black caps).
Mix thoroughly with hand mixer for three to five (3-5) minutes scraping the sides and bottom of mixing container and transfer to a clean secondary mixing container and mix again for best results.
Pour at temperatures between 65°F- 85°F with low humidity in a dust free environment. Store above 32°F. Once mixed and poured allow 4-6 hours between pouring additional layers. Wait 1-2 days for a machine ready cure and 30-45 days for a full optimal hardness.